You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Riding Mower Fitted With Filter Off 20 Gal.Shop Vac
Rick Plunkett, Albany, Ky.: “When the air filter on my 2-year-old Toro 5060 zero-turn riding mower got dirty, I replaced it with a much bigger filter designed for a 20-gal. shop vac that I already had. The original filter was only about 4 in. long and a new one would have cost $37, which I thought was ridiculous. A sho
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Riding Mower Fitted With Filter Off 20 Gal Shop Vac ENGINES Rick Plunkett Albany Ky : “When the air filter on my 2-year-old Toro 5060 zero-turn riding mower got dirty I replaced it with a much bigger filter designed for a 20-gal shop vac that I already had The original filter was only about 4 in long and a new one would have cost $37 which I thought was ridiculous A shop vac filter has much more capacity and costs only about $10 I think the same idea would work on any mower brand or model “I cut a piece of Lexan into a large circle to make a base for the filter and cut a smaller hole in the middle to fit the air intake To protect the filter I wrapped a section of metal gutter guard around it and secured it with plastic zip strips I then installed a fine mesh metal screen over the carburetor intake and screwed the filter down on top of it “I used the lid off an aluminum cooking pan as a cover for the filter I removed the handle and ran a long screw up through the filter’s base and out through the pan lid then put a plastic nut on it “I installed the big filter about a year ago and really like how it turned out Whenever it gets dirty I just use a garden hose to clean it I kept the original filter in case I ever decide to sell the mower ”
To read the rest of this story, download this issue below or click
here to register with your account number.
