You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Alternative To Replacing The Bearing On His No Till Grain Drill
Bayard E. Young, Elkwood, Va.: “After several years of use the coulters and double disc openers on my Tye 3-pt. mounted, 10-ft. no-till grain drill became wobbly due to worn-out sealed bearings, a problem that was caused by a lack of grease. Replacing the bearings was a big job, and I decided that I was only going to d
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Alternative To Replacing The Bearing On His No Till Grain Drill DRILLS Bayard E Young Elkwood Va : “After several years of use the coulters and double disc openers on my Tye 3-pt mounted 10-ft no-till grain drill became wobbly due to worn-out sealed bearings a problem that was caused by a lack of grease Replacing the bearings was a big job and I decided that I was only going to do it once “So instead of installing new bearings I decided to drill and tap in new grease zerk fittings That way I can grease the bearings any time I want It was a lot of work because with the disc openers I had to first remove the rivets from the caps However now the sealed bearings on this drill will stay greased forever ”
To read the rest of this story, download this issue below or click
here to register with your account number.
