Fix For Problem Case IH 3-Pt. Pins

Fix For Problem Case IH 3-Pt Pins HITCHES Case IH owners with electronic draft sensing for 3-pt hitches can fix failed pin problems fast The Draft Sensing Pin Eliminator Kit is a low-cost fix for the frustrating problem says John Boersma Ag Electronics Repair


    “Faulty draft sensing pins send error codes to the on-board computer halting operation of the 3-pt ” explains Boersma “Each time the operator activates the reset cycle the computer allows only a 5-second operation of the 3-pt The OEM solution is replacing the high-cost sensing pins ”


    The problem occurs on Series 71 72 and 92 Case IH tractors equipped with electronic draft sensing Boersma’s solution is a 2-piece kit that plugs into the existing wiring harness between the sensors and the computer It cancels the error codes and allows manual use of the 3-pt


    “The kit is simple to install ” says Boersma “Just turn off the tractor and disconnect the draft sensors on each side Plug in the modified connectors to the tractor wiring harness ”


    Boersma reports that load sensing is lost However all other functions are unaffected as are other tractor components He suggests it as a quick fix until draft sensors can be replaced


    “The kit can be a permanent fix for farmers not requiring the draft sensing option ” says Boersma


    The kit has been available from several distributors but Boersma is now offering the kit direct at the wholesale price of $98 40


    Contact: FARM SHOW Followup Ag Electronics Repair 36355 County 14 Blvd Cannon Falls Minn 55009 ph 507 649-1022 or 507 263-5515; fax 507 263-0211; email: monitordoc@hotmail com

To read the rest of this story, download this issue below or click here to register with your account number.