You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Modification To Electronic Ignition On Log Splitter's Wisconsin Engine
John Heide, Deerbrook, Wis.: “The electronic ignition on my log splitter’s Wisconsin engine quit working, and they wanted $300 to replace the ignition module. Instead, I took a 4-cyl. distributor I already had and ground 3 of the 4 lobes off the camshaft, then bolted the distributor to the engine.
“Now, instea
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Modification To Electronic Ignition On Log Splitter s Wisconsin Engine ENGINES John Heide Deerbrook Wis : “The electronic ignition on my log splitter’s Wisconsin engine quit working and they wanted $300 to replace the ignition module Instead I took a 4-cyl distributor I already had and ground 3 of the 4 lobes off the camshaft then bolted the distributor to the engine “Now instead of the breaker points opening 4 times for every revolution of the distributor the points open only once To drive the distributor I drilled through the center of the engine crankshaft and installed a 1/2-in dia shaft A length of hydraulic hose forms a coupling that connects the shaft to the distributor The original clamp on the distributor is used to adjust engine timing “I already had all the parts I needed including the coil No problems after five years ”
To read the rest of this story, download this issue below or click
here to register with your account number.
