You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
How To Put A New Starter On A 1997 Deere 6300 Tractor
Harold David Rupard, Winchester, Ky.: “When I tried putting a new starter on my 1997 Deere 6300 tractor, I found there wasn’t room for a wrench. I tried using a special tool borrowed from my Deere dealer, but it didn’t help. So I came up with my own solution. I used a bandsaw to cut a box end wrench in half and put the
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
How To Put A New Starter On A 1997 Deere 6300 Tractor FARM SHOP Miscellaneous Harold David Rupard Winchester Ky : “When I tried putting a new starter on my 1997 Deere 6300 tractor I found there wasn’t room for a wrench I tried using a special tool borrowed from my Deere dealer but it didn’t help So I came up with my own solution I used a bandsaw to cut a box end wrench in half and put the box end half on the nut Then I used a cold chisel and hammer to tap around the nut until it came off “The lug bolts on the tractor’s dual wheels were too long to get a deepwell socket on them So I used my bandsaw to cut a socket in half Then I welded the open end of the socket to one end of a 6-in long pipe and welded the drive end to the other end To remove the wheel I just connect the socket drive end of the pipe to my air-operated wrench ”
To read the rest of this story, download this issue below or click
here to register with your account number.
