You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Tool For Knocking Tire Beads Off Wheel Rims
Karl Oysmueller, Pink Mountain, B.C.: "I made a tool for knocking tire beads off wheel rims when changing or patching tires. It's quite simple. A solid steel rod fits inside a larger pipe. At the bottom of the pipe, there's a short length of rod flattened to form a wedge. This wedge is free to move up and down about 1
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Tool For Knocking Tire Beads Off Wheel Rims TIRES/WHEELS Miscellaneous 27-3-36 Karl Oysmueller, Pink Mountain, B.C.: "I made a tool for knocking tire beads off wheel rims when changing or patching tires. It's quite simple. A solid steel rod fits inside a larger pipe. At the bottom of the pipe, there's a short length of rod flattened to form a wedge. This wedge is free to move up and down about 1 1/2 in. on top of a spring that's held in place by two welded-on collars. The flattened end is pushed between the rim and the tire. Holding the pipe with one hand, I use the inside rod to hammer on the bottom piece which forces the bead off the rim. It usually takes just a few blows to knock the bead off. I've used it on everything from car tires to big truck tires."
To read the rest of this story, download this issue below or click
here to register with your account number.
