You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Fuel Tanker Slurry Spreader
"Performance has been excellent. It throws manure out in an even 25-ft. wide pattern. Total cost, including the tanker, was just $850," says Bruce M. Klemm, Whitelaw, Wis., who built his own 4,000-gal. liquid manure spreader tank out of a "junked" fuel tanker.
The first step in converting the tanker to handle ma
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Fuel tanker slurry spreader MANURE HANDLING Equipment 13-2-8 "Performance has been excellent. It throws manure out in an even 25-ft. wide pattern. Total cost, including the tanker, was just $850," says Bruce M. Klemm, Whitelaw, Wis., who built his own 4,000-gal. liquid manure spreader tank out of a "junked" fuel tanker.
The first step in converting the tanker to handle manure was to cut open all of the baffled compartments inside the tank so manure can flow freely to fill the entire tanker. Then he cut a 36 by 36-in. hole in the top of the tanker at the rear and welded 12-in. high sides around the opening to form a fill hopper.
At the rear, Klemm made his own "slurry slinger" out of a blower from an old International Harvester grinder mixer. "I welded a short piece of 6-in. dia. well casing horizontally into the lower rear end of the tanker. I made a hydraulic gate valve out of plate steel and an 8-in. stroke cylinder. It controls the flow of slurry to the slinger assembly which consists of the blower chain-driven by a 250 rpm hydraulic motor," says Klemm, noting that the motor is geared up 2: 1 with sprockets to drive the blower at 500 rpm's.
Contact: FARM SHOW Followup, Bruce M. Klemm, 9008 Meier Rd., Whitelaw, Wis. 54247 (ph 414 732-4592).
To read the rest of this story, download this issue below or click
here to register with your account number.
