You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Ditch Hoe For Front End Loaders
I designed and patented this ditch hoe for front-end loaders. It digs a ditch 6 to 12 in. wide to a depth of 54 in. What makes the digger unique is the way it dumps dirt to the side of the ditch. The digger arm mounts on a metal tube that's rotated by a hydraulic cylinder. The bucket makes a 180? arc as it digs a bucke
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Ditch hoe for front end loaders TRACTORS Loaders 16-3-32 I designed and patented this ditch hoe for front-end loaders. It digs a ditch 6 to 12 in. wide to a depth of 54 in. What makes the digger unique is the way it dumps dirt to the side of the ditch. The digger arm mounts on a metal tube that's rotated by a hydraulic cylinder. The bucket makes a 180? arc as it digs a bucket of dirt, then moves to the side to dump when the cylinder reverses rotation of the tube. Bucket then returns to digging position for another pass.
It's simple and doesn't put much stress on the tractor since it slices instead of shearing. Mounts with 4 pins on any loader in place of the bucket. Sells for less than $1,400 and is being manufactured by Plainsman Manufacturing, Plains, Kansas 67869. (Garland Fitzwater, Box 126, Protection, Kan. 67127 ph 316 622-4852)
To read the rest of this story, download this issue below or click
here to register with your account number.
