You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Do It Yourself Chimney Cleaner
"I got tired of climbing up on the roof to poke the creosote out of the chimney," says Henry Fite, Shelby, N. C., who built a simple cleaner that he can operate from the ground.
Made from ¢ in. pipe and 3/8-in. steel rod, the cleaner simply slips into the top of the chimney, held in place by its own weight. Beca
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Do it yourself chimney cleaner FARM HOME Miscellaneous 11-5-8 "I got tired of climbing up on the roof to poke the creosote out of the chimney," says Henry Fite, Shelby, N. C., who built a simple cleaner that he can operate from the ground.
Made from ¢ in. pipe and 3/8-in. steel rod, the cleaner simply slips into the top of the chimney, held in place by its own weight. Because it's made out of pipe and rod, it doesn't restrict airflow out of the chimney.
The cleaner consists of a housing, made from pipe, that supports the free-fall cleaner made from steel rod. Fite weighted the cleaner with heavy scrap steel. The free-fall weight is fashioned so that it comes to a point on either side which helps poke out creosote from the corners of the chimney. Fite says it's important to angle the cleaner in such a way that it fits snugly into the corners of the chimney, or flue liner, so it'll be rigid when the chain is pulled.
"It takes just a few seconds to raise and lower the cleaner, standing on the ground. Takes the worry out of burning wood," notes Fite, who's used the home-built chimney cleaner for 4 seasons without a hitch.
Contact: FARM SHOW Followup, Henry J. Fite, Rt. 3, Box 446A, Shelby, N.C. 28150.
To read the rest of this story, download this issue below or click
here to register with your account number.
