You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Weld On Flare Ends Fix Hydraulic Tubing
"There's nothing more irritating than to have to replace an entire section of steel hydraulic tubing on a tractor or combine just because the flare end cracks," says farmer-inventor William Moser, Morris, Minn., who recently began marketing replacement flare ends for steel hydraulic tubing that let you simply cut off t
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Weld on flare ends fix hydraulic tubing FARM SHOP Repairs 10-3-25 "There's nothing more irritating than to have to replace an entire section of steel hydraulic tubing on a tractor or combine just because the flare end cracks," says farmer-inventor William Moser, Morris, Minn., who recently began marketing replacement flare ends for steel hydraulic tubing that let you simply cut off the old cracked end and weld on a new one.
Unlike copper tubing, steel tubing cannot be easily flared by hand. When the flared end cracks ù due to vibration or during work on the hydraulic system ù the entire tube has to be replaced. Replacement tubes generally cost $20 to $70, or more.
To install, simply cut out a section of tube that's the same length as the add-on flare end and weld it in place with a sleeve that fits over the add-on end. Flare ends are available to fit 3/8, 1/2, 5/8 and 3/4 in. dia. tubing. They range in price from $2.75 to $4.25. Moser notes that they'll also fit steel air lines, as well as other steel tubing. He also makes sleeve patches for fixing holes in steel tubing.
For more information, contact: FARM SHOW Followup, William Moser, Hydraulic Tube Repairs, Inc., Rt. 3, Box 152, Morris, Minn. 56267 (ph 612 589-4149).
To read the rest of this story, download this issue below or click
here to register with your account number.
