You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Trip Sensor For Deep Rip Chisel
It can be difficult to see when a shank trips on a big disk ripper, especially when pulling it with a4-WD tractor. The shanks can end up as far as 30 ft. behind the tractor.
That's why Jake Stockle, Colfax, Ill., came up with an electronic trip sensor that lets him know instantly if a shank trips. He says the sp
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Trip Sensor For Deep Rip Chisel TILLAGE EUIPMENT Chisel Plows (9) 18-2-31 It can be difficult to see when a shank trips on a big disk ripper, especially when pulling it with a4-WD tractor. The shanks can end up as far as 30 ft. behind the tractor.
That's why Jake Stockle, Colfax, Ill., came up with an electronic trip sensor that lets him know instantly if a shank trips. He says the special-built monitor could also be used on any other tillage equipment with trip shanks or even on breakaway planter markers.
"Basically, a contact switch is mounted on each standard and a magnet is fitted to each shank. In operation, the magnet holds the contact switch open. But when the shank trips back, the magnet falls away from the switch, closing the switch and tripping a corresponding light for that shank on a monitor in the cab," explains Stockle, who built the system for his own use and would like to find a manufacturer.
Contact: FARM SHOW Followup, Jake Stockle, Rt. 2, Box 103, Colfax, ILI. 61728 (ph 309 723-6638).
To read the rest of this story, download this issue below or click
here to register with your account number.
