You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Skid Steer-Mounted Wire Roller
Rolling up barbed wire by hand used to take forever and it was always a pretty scratchy job. Now we can roll up as much as 1 mile of barbed wire fence per hour - without getting all cut-up - thanks to this skid steer-mounted wire roller we made out of odds and ends.
We started by making 5-ft. long angle iron bra
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Skid Steer-Mounted Wire Roller FENCING Tools 20-5-34 Rolling up barbed wire by hand used to take forever and it was always a pretty scratchy job. Now we can roll up as much as 1 mile of barbed wire fence per hour - without getting all cut-up - thanks to this skid steer-mounted wire roller we made out of odds and ends.
We started by making 5-ft. long angle iron brackets to extend the pallet forks on our Bobcat 643 loader. Then we made a bushing out of 2 5/8-in. dia. pipe. We fitted an-other pipe through the bushing and equipped each end with 3 1/2-ft. dia. steel wheels off an old grain conveyor that serve as sprockets. One of the wheels is belt-driven by a hydraulic pump, with a small pulley used for a belt tensioner. We welded rod around one side of the drive wheel to keep the belt from slipping off. (Joel Rosenau, 114 W. 10th St., Lemmon, S. Dak. 57638; ph 605 374-5444).
To read the rest of this story, download this issue below or click
here to register with your account number.
