You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Old Tire Pig Feeder
You can make efficient, virtually indestructible pig feeders using an old bias ply tire and wheel rim with a barrel mounted on top of it to hold feed.
"There's no waste. Works great with ground feed," says Gene Zimmerman, Abbotsford, Wis.
He lays a 14-in. bias ply tire and rim flat on the ground, with the d
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Old Tire Pig Feeder HOG EQUIPMENT & IDEAS Hog Equipment & Ideas (351) 18-3-38 You can make efficient, virtually indestructible pig feeders using an old bias ply tire and wheel rim with a barrel mounted on top of it to hold feed.
"There's no waste. Works great with ground feed," says Gene Zimmerman, Abbotsford, Wis.
He lays a 14-in. bias ply tire and rim flat on the ground, with the dish side of the rim downward. Then he cuts feed flap openings in the face of the tire that pigs can lift with their noses. The flaps are about 5 in. wide. He cuts horizontally at the center line of the tire, and then upward on either side of the 5-in. cut all the way back to the tire bead. He leaves about a 2-in. gap between flaps so there are 8 or 9 flaps in all.
Then he bolted a 15-gal. plastic soap barrel and in the rim to the top of the rim and used a 4-in. angle grinder to cut three holes in the bottom of the barrel to let feed drop down into the tire.
Contact: FARM SHOW Followup, Gene Zimmerman, Box 83, Abbotsford, Wis. 54405.
To read the rest of this story, download this issue below or click
here to register with your account number.
