You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Old Engine Electric Winch
Junked engines can be salvaged for use as heavy-duty electric winches, according to Joe Halvorson, Eleva, Wis., who made an electric winch from a 1939 6-cyl. Chevy engine.
"I cut the block and crankshaft off in the 6th cylinder close to the flywheel, just ahead of the first main bearing. I left the flywheel in p
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Old engine electric winch ENGINES Engines 13-5-9 Junked engines can be salvaged for use as heavy-duty electric winches, according to Joe Halvorson, Eleva, Wis., who made an electric winch from a 1939 6-cyl. Chevy engine.
"I cut the block and crankshaft off in the 6th cylinder close to the flywheel, just ahead of the first main bearing. I left the flywheel in place. Then I welded a square shaft to the end of the crankshaft along with a drum to wind up cable. A 6-volt starter motor provides the power, belt-driving the crankshaft the way it would if the engine were still in use," says Halvorson.
He says engines make great winches because of the heavy duty bearings on the crankshaft. The '39 Chevy engine he used has 4-in. bearings. He can use the winch for most any heavy lifting or towing job around the farm.
"Cutting away the parts of the engine block that weren't needed was the hardest part of the job. I used an electric arc," says Halvorson.
Contact: FARM SHOW Followup, Joe O. Halvorson, Rt. 2, Eleva, Wis. 54738 (ph 715 287-4556).
To read the rest of this story, download this issue below or click
here to register with your account number.
