You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Shop Stove Made From Water Heater
"When we decided to cut costs by building a wood-fired shop heater, we looked at many different ways of making our own. We finally decided to use an old discarded 80-gal. hot water heater," says Lonnie Erbes, Colfax, N. Dak.
"We cut a lid out of the top of the heater so we can load big logs down into the heater.
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Shop stove made from water heater ENERGY Wood Burners (65) 12-1-26 "When we decided to cut costs by building a wood-fired shop heater, we looked at many different ways of making our own. We finally decided to use an old discarded 80-gal. hot water heater," says Lonnie Erbes, Colfax, N. Dak.
"We cut a lid out of the top of the heater so we can load big logs down into the heater. We installed a grate towards the bottom of the heater made out of 1-in. dia. steel tubes that run all the way through the heater. An old fan is attached to a housing at one end of the grate tubes. It blows air through the grate to keep it from burning up, and circulates hot air.
"We enclosed the entire heater in a square housing made with sheet metal and 1/2-in. angle iron. We attached a large furnace fan to the rear of the housing. It blows air up and out the top of the housing. A large ceiling fan above the heater circulates the air.
"Total cost was only about $60. It works extremely well. Four or five logs will burn all day."
Contact: FARM SHOW Followup, Lonnie Erbes, Colfax, N. Dak. 58018.
To read the rest of this story, download this issue below or click
here to register with your account number.
