You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Crop Sprayer Created From Rollover Combine
Steve Loomis almost junked his 1981 Gleaner MH2 hillside combine after it was wrecked in a rollover accident. But then the St. John, Wash., farmer got the idea of converting the combine into a self-propelled sprayer.
Loomis's father-in-law was driving the combine on a highway when it slipped into the ditch and fl
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Crop Sprayer Created From Rollover Combine COMBINES Conversions 18-1-40 Steve Loomis almost junked his 1981 Gleaner MH2 hillside combine after it was wrecked in a rollover accident. But then the St. John, Wash., farmer got the idea of converting the combine into a self-propelled sprayer.
Loomis's father-in-law was driving the combine on a highway when it slipped into the ditch and flipped over, landing upside down in a field. Luckily, he escaped with only bruises and scrapes but the upper half of the combine was ruined. However, the frame was undamaged.
"Financially I came out smelling like a rose," says Loomis, who made the conversion last winter. "The insurance company paid me for the value of the combine, then gave it to me because they didn't want to spend the money to haul it away. I spent only about $5,000 to convert it into a sprayer. I could have spent as much as $26,000 for an 80-ft. pull-type sprayer."
Loomis removed the cab and replaced it with a used one designed for an earlier model Gleaner combine. He stripped every-thing else down to the frame, remounting the 158 hp diesel engine in a lower, forward position. The combine still has its original hydrostatic transmission. Loomis made a steel cradle for a 650-gal. spray tank that mounts behind the engine. He used sq. steel tubing to build a 92-ft., 6-section boom that's mounted on the combine drive axle. Loomis welded lengths of 6-in. sq. steel tubing to each side of the axle, then bolted the boom to the tubing. The boom hydraulically folds to an 18-ft. width from the cab.
The boom is divided into two halves that can be individually controlled from the cab. It's supported by 6 small implement gauge wheels, one per section. "I couldn't mount the boom in place of the header because it would have been too heavy for the header mounting brackets. Also, on our steep hills the boom wouldn't have stayed parallel to the ground. On a self leveling combine, the axle is the only part of the combine that stays parallel to the ground. The nozzles are spaced 20 in. apart. Foam marker nozzles are mounted on each end of the boom. The hydraulic driven sprayer pump is controlled from the cab.
Contact: FARM SHOW Followup, Steve Loomis, Box 2, St. John, Wash. 99171 (ph 509 648-3961).
To read the rest of this story, download this issue below or click
here to register with your account number.
