You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
No Hydraulics Bale Unroller
"I came up with this bale unroller for the 3-pt. on an older model Ferguson tractor without external hydraulics," says Ray Faulkner, Bastian, Va.
The unroller has two arms that clamp onto the side of a round bale. The key feature is the hand-cranked 24-in. "ratchet binder" between the bale unroller arms that's u
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
No Hydraulics Bale Unroller HAY & FORAGE HARVESTING Bale Handling (5) 18-2-7 "I came up with this bale unroller for the 3-pt. on an older model Ferguson tractor without external hydraulics," says Ray Faulkner, Bastian, Va.
The unroller has two arms that clamp onto the side of a round bale. The key feature is the hand-cranked 24-in. "ratchet binder" between the bale unroller arms that's used to clamp them down on the bale. Eye bolts on either end of the binder are cranked in or out by a ratchet lever at center that the operator cranks by hand.
The main cross bar on the bale handler is a6-in. I-beam. Two pieces of 2 by 6-in. channel iron make up the arms. Two 1-in. dia. bolts are used as hinges. Bale unroller discs were made from trailing wheels off an old IHC side delivery rake. Faulkner welded 1 1/4-in. dia. pointed stub shafts to the hub caps on the wheels. The wheels turn freely so bales can be unrolled by pulling them along the ground.
"I've used this unroller for five years with no problems," says Faulkner. "Everything used to build it was scrap metal except for the ratchet binder."
Contact FARM SHOW Follovvup, Ray Faulkner, Rt. 1, Box 1780, Bastian, Va.
24314 (ph 703 688-4470).
To read the rest of this story, download this issue below or click
here to register with your account number.
