You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Simple,Low-Cost Bead Breaker
"It's easy to use and cost almost nothing to build," says Joe Lewis, Edina, Mo., about his bead breaker that he made from 2-in. scrap steel.
He welded together two 8-in. long steel prongs to a 24-in. vertical shaft made of heavy steel. To use the bead breaker he simply lays a tire on the bottom prong, then sets a
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Simple,Low-Cost Bead Breaker TIRES/WHEELS Handling 20-2-6 "It's easy to use and cost almost nothing to build," says Joe Lewis, Edina, Mo., about his bead breaker that he made from 2-in. scrap steel.
He welded together two 8-in. long steel prongs to a 24-in. vertical shaft made of heavy steel. To use the bead breaker he simply lays a tire on the bottom prong, then sets a hydraulic bottle jack on top of the tire as close to the bead as possible. When he pumps the jack up against the top prong the jack pushes down on the bead.
"It's never failed to break the bead loose from the tire," says Lewis. "I've used it on everything from 13-in. car tires to 10.00 by 20 truck tires."
Contact: FARM SHOW Followup, Joe D. Lewis, Rt. 3, Edina, Mo. 63537 (ph 816 397-3300).
To read the rest of this story, download this issue below or click
here to register with your account number.
