You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Hot Water Electric Heating Element Heats Grease Bucket
Robert Lindsay, Viola, Idaho: "I mounted a hot water electric heating element in the bottom of a steel barrel, allowing me to quickly warm up a 5-gal. bucket of grease placed in water inside the barrel. It lets me operate my grease pump at temperatures as low as 30? below zero.
"I used a torch to cut a 30-gal. ba
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Hot Water Electric Heating Element Heats Grease Bucket FARM SHOP Handy Hints 19-6-31 Robert Lindsay, Viola, Idaho: "I mounted a hot water electric heating element in the bottom of a steel barrel, allowing me to quickly warm up a 5-gal. bucket of grease placed in water inside the barrel. It lets me operate my grease pump at temperatures as low as 30? below zero.
"I used a torch to cut a 30-gal. barrel in half. I cut a small hole in the side of the tank and welded a pipe fitting into it, then screwed the heater element into the fitting. Then I bolted a 3-prong, 220-volt electric outlet onto the top of the barrel and wired it to the element.
"It takes only about 30 minutes to get the grease warm enough so I can pump it. I bought the heating element at a hardware store. The bottom of the bucket rests on top of the element, which is protected by a U-shaped piece of steel that's welded to the pipe fitting. I mounted a temperature control unit between the outlet and element, but I don't depend on it. I just run the heating element long enough to get the grease warm."
To read the rest of this story, download this issue below or click
here to register with your account number.
