You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Quick-Tach Universal Bucket Mount
"I have five different buckets and I wanted an easier way to attach them to the Oliver 558 loader on my Deere 1630 tractor. Some of the buckets had a round back side that I didn't want to alter so I made a quick-tach plate that attaches directly to the loader cylinders and lift arms," says Fred Dunlop, Stayner, Ontario
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Quick-tach universal bucket mount TRACTORS Loaders 16-3-9 "I have five different buckets and I wanted an easier way to attach them to the Oliver 558 loader on my Deere 1630 tractor. Some of the buckets had a round back side that I didn't want to alter so I made a quick-tach plate that attaches directly to the loader cylinders and lift arms," says Fred Dunlop, Stayner, Ontario.
Dunlop used 1/2-in. steel plate to make the quick-tach plate. He used 3/8 by 3-in. angle iron and 1/2 by 3-in. flat bar to attach the plate to the lift arms. He welded four small pieces of 1-in. steel bar to the front side of the plate. The two upper pieces are notched to slip into the buckets where the cylinders previously attached while the bottom two pieces have holes for pins to attach to lift arms.
He spent about $50.
Contact FARM SHOW Followup,Fred Dunlop, Box 761, Stayner, Ontario, Canada LOM 1S0 (ph 705 429-5005).
To read the rest of this story, download this issue below or click
here to register with your account number.
