You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Slick Adapter To Move Garbage Bins
Nicholas Streenz wanted to make it easier for his grandpa to move a full wheeled garbage container to the end of his driveway, so he built a lifting tool that mounts to the 3-pt. hitch of a tractor. Streenz works as a welder and metal fabricator, job experience that allowed him to fabricate the handy device and weld it
.......... You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Slick Adapter To Move Garbage Bins FARM HOME Miscellaneous Nicholas Streenz wanted to make it easier for his grandpa to move a full wheeled garbage container to the end of his driveway so he built a lifting tool that mounts to the 3-pt hitch of a tractor Streenz works as a welder and metal fabricator job experience that allowed him to fabricate the handy device and weld it together in less than an hour The base of the lifter is a large piece of angle iron that bolts to the horizontal drawbar on the tractor He welded two vertical uprights made of 1 1/2-in wide channel iron to the support bar and connected them on top with a large metal pin Two U-shaped metal hooks are welded onto a metal plate welded to the uprights The channel iron brackets extend about 12-in above the hooks and are held together at the top by a metal pin The pin connects to the top link of the tractor’s 3-pt hitch When the 3-pt hitch is raised the U-shaped metal brackets grab the lift bar of the garbage container Streenz says his grandpa acted like a little kid when he got to use it because now he has another chance to drive his tractor and doesn’t have to walk the bins down his driveway Contact: FARM SHOW Followup Nicholas Streenz Saybrook Ill
To read the rest of this story, download this issue below or click
here to register with your account number.