You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
2-Wheeled Snowblower
My 2-wheeled snowblower throws snow 20 to 30 ft. and cost less than $100 to build. I built it using a 30-in. snowblower auger and other parts that were originally designed to mount on a Cub Cadet garden tractor.
The blower's powered by a Wisconsin 18 hp 2-cycle gas engine that I salvaged from an old New Holland b
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
2-Wheeled Snowblower SNOWBLOWERS Snowblowers 18-6-38 My 2-wheeled snowblower throws snow 20 to 30 ft. and cost less than $100 to build. I built it using a 30-in. snowblower auger and other parts that were originally designed to mount on a Cub Cadet garden tractor.
The blower's powered by a Wisconsin 18 hp 2-cycle gas engine that I salvaged from an old New Holland baler. The engine belt-drives a gearbox on the snowblower auger. I activate the auger with a lever connected to an idler pulley. A belt-driven transfer case is used to reduce auger speed. The snowblower's axle, 8-in. tires, and 2-speed belt-driven transmission were taken from the Cub Cadet.
It really works. The transfer case runs so slow I can shift right on-the-go. The engine mounts directly above the wheels - on a frame made out of 4-in. flat steel - so they have a lot of traction. I don't even have to use chains. I went right through 2 1/2-ft. deep snow last winter with no problem.
The engine runs really quiet. The 4-gal. gas tank came with the baler motor and holds enough gas to last all winter. I use a pair of ropes hooked up to each side of the blower spout to turn it from side to side. (Roger Fisher, Box 9048, Spirit Lake, Iowa 51360)
To read the rest of this story, download this issue below or click
here to register with your account number.
