You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Work Table Lifted By Hydraulic Jack
To work on mowers, pressure washers, and other equipment that’s too heavy to lift, Bob Payne, Coldwater, Miss., bolted a lift table to the lift plate on a large hydraulic jack. The 3/4-in. plywood deck has hinged 2 by 4 sides that can be latched shut. Car ramps make it easy to roll equipment onto the platform when it’s
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Work Table Lifted By Hydraulic Jack FARM SHOP Handy Hints To work on mowers pressure washers and other equipment that’s too heavy to lift Bob Payne Coldwater Miss bolted a lift table to the lift plate on a large hydraulic jack The 3/4-in plywood deck has hinged 2 by 4 sides that can be latched shut Car ramps make it easy to roll equipment onto the platform when it’s down Then you close the sides and crank it up with the jack Once the lift table is at working height Payne puts a sawhorse under each end and lowers the table onto them “I can use the lift table wherever I need it and it stores under a workbench It’s easy to unbolt the table from the lift jack if you need the jack for other uses ” he says Contact: FARM SHOW Followup Bob Payne 65 Wallace Road Coldwater Miss 38618
To read the rest of this story, download this issue below or click
here to register with your account number.
