“Log Dog” Simplifies Wood Cutting

“Log Dog” Simplifies Wood Cutting WOODLOT EQUIPMENT Miscellaneous “I was tired of cutting wood on the ground and having the chain hit dirt or rocks so I built a log picker for the front of my pallet fork Now my loader forks can hold a log about waist high and I can just walk along and cut off pieces from each end without having to stoop over ” says Pennsylvania handyman Bob Stevenson Stevenson built his “Log Dog” out of 3-in channel iron but he says “One of these could easily be made from square stock or angle iron whatever’s available in the junk pile “Basically it’s a manual eccentric arm that holds a de-limbed log in place so it doesn’t tilt or turn and it sure makes cutting a whole lot easier ” Stevenson says “I usually grab a log or limb with the forks lock the Log Dog in place then drive over to the wood pile and cut away The last cut is in the middle between the forks and both pieces fall on the pile ” Stevenson’s device mounts slightly further out than the regular forks attaching to J hooks which are free-swinging The J hooks mount onto the bucket with a steel rod supporting them His Log Dog bolts in place so the attachment can’t slide off “I’ve used the Log Dog for 3 years without any problems holding pieces from 4 in to about 18 in dia and up to 30 ft long ” Stevenson says “Cutting this way is at least twice as fast and much safer than cutting on the ground ” Stevenson’s wood cutting setup also includes a homemade splitter mounted on back of the tractor with a carry-all box for his tools log roller wedges chain saw and spare parts Contact: FARM SHOW Followup Bob Stevenson 440 Robinson Road Blain Pa 17006 ph 717 536-3793

To read the rest of this story, download this issue below or click here to register with your account number.