You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Pto-Mounted Chain Holder
Mark Daun, Kiel, Wis., came up with this pto guard-mounted log chain holder for his Deere 2030 tractor.
“I use the chains for pulling logs or firewood limbs,” says Daun. “Most people wrap the chains around the 3-pt.’s lower arms but that’s ineffective, dangerous, takes too much time, and gets messy whenever
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Pto-Mounted Chain Holder POWER TAKE OFFS PTO S Mark Daun Kiel Wis came up with this pto guard-mounted log chain holder for his Deere 2030 tractor “I use the chains for pulling logs or firewood limbs ” says Daun “Most people wrap the chains around the 3-pt ’s lower arms but that’s ineffective dangerous takes too much time and gets messy whenever you need to use more than one chain The box attaches to the lugs where the 3-pt top link would normally be and rests on the pto guard ” The 2 boxes are separated by a short length of angle iron welded in each corner except for where the attaching links are located “Each box holds at least two 16-ft chains ” says Daun “Holes in the bottom allow melted snow and dirt to fall through The spacer between the boxes provides a window to see the drawbar for hitching to a wagon or trailer Three bracket-mounted springs keep excess chain inside the box yet allow the chain to feed out safely if it ever unhooks from the grab hook on the crossbar ” Contact: FARM SHOW Followup Mark Daun 19734 Point Creek Rd Kiel Wis 53042 m_daun@icloud com
To read the rest of this story, download this issue below or click
here to register with your account number.
