You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Loader-Mounted “Disc Trencher”
“I built a skid loader-mounted trenching tool equipped with a big 31-in. dia. ‘blade’. It weighs about 200 lbs. and can cut through sod up to 6 in. deep,” says 84-year-old Bud Vogelzang, Sioux Center, Iowa.
Vogelzang built the trenching tool for his brother, who needed to dig a trench to drain water away from h
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Loader-Mounted “Disc Trencher” TILLAGE EUIPMENT Miscellaneous “I built a skid loader-mounted trenching tool equipped with a big 31-in dia ‘blade’ It weighs about 200 lbs and can cut through sod up to 6 in deep ” says 84-year-old Bud Vogelzang Sioux Center Iowa Vogelzang built the trenching tool for his brother who needed to dig a trench to drain water away from his house “I bought the blade at a sale several years ago and it laid in my grove for a long time before I found a use for it My brother tried using the bucket on his 40 hp New Holland skid loader to cut down through the sod but it couldn’t However the big disc blade had no problem It can be hydraulically tilted to change the angle and depth of cut ” Vogelzang says the disc blade which probably came off an old disc plow was mounted on a 2-in dia vertical shaft when he found it He used 4-in square tubing to weld a quick tach frame together then bolted and U-clamped the shaft onto it Contact: FARM SHOW Followup Bud Vogelzang 13 1/2 3rd Ave S W Sioux Center Iowa 51250 ph 712 441-1037
To read the rest of this story, download this issue below or click
here to register with your account number.
