You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
He Cleans The Engine Block Surface For Head Gasket Replacement
Joe Johnson, Meridian, Miss.: “I was working on a 3-cyl. Perkins diesel engine from a Massey Ferguson 150. I needed a way to keep debris from falling into the cylinder bores when cleaning the engine block surface for head gasket replacement.
“Everyone says to stuff rags into the bores but that’s not every
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
He Cleans The Engine Block Surface For Head Gasket Replacement ENGINES Joe Johnson Meridian Miss : “I was working on a 3-cyl Perkins diesel engine from a Massey Ferguson 150 I needed a way to keep debris from falling into the cylinder bores when cleaning the engine block surface for head gasket replacement “Everyone says to stuff rags into the bores but that’s not every effective Instead I decided to use coffee filters and grease Rotate the crankshaft until all pistons are as far from top dead center as possible Cut each filter if necessary so it will fit neatly into the bore without extending above the surface Place a ring of grease around each bore and press the edges of the filters into the grease After scraping and sanding the block carefully remove each filter and wipe down the bores No debris will have gotten into the cylinders ”
To read the rest of this story, download this issue below or click
here to register with your account number.
