You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Easy Funnel Made From PVC Pipe
Dennis Howell was tired of spilling oil and needing two hands to put oil into his tractors and trucks. He tried different funnels but found none of them were large enough, worked with one hand, or were durable. “None of the funnels I used worked like I thought they should, or lasted long enough to be worth it.”
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Easy Funnel Made From PVC Pipe TRACTORS Accessories Dennis Howell was tired of spilling oil and needing two hands to put oil into his tractors and trucks He tried different funnels but found none of them were large enough worked with one hand or were durable “None of the funnels I used worked like I thought they should or lasted long enough to be worth it ” He came up with his own design using pvc pipe “It stays still straight and is the last funnel you’ll ever use on your truck or tractor ” he says Howell’s funnel starts with 4-in pvc and reduces down to 1 or 3/4-in depending on the needs of your tractor or truck He uses a 22-1/2 degree bend to keep the funnel upright when filling The pieces are glued together Costs are about $10 to $15 per funnel unless you have pvc laying around to use says Howell “I have made about a dozen of these for friends and neighbors They’re easy to make and don’t cost a lot You can angle them however you need to fit a particular piece of equipment ” Contact: FARM SHOW Followup Dennis Howell Vernon Center Minn ph 507- 380-4375
To read the rest of this story, download this issue below or click
here to register with your account number.
