You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
He 3D-Printed His Own Planter
British farmer Jonny Leech spent only about $12 per row to 3D-print the metering system on his home-built planter. He says it works as well as most commercially available planters.
Leech bought a $250 3D printer and a software package called “Solidworks” that allowed him to make 15 prototypes before he came
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
He 3D-Printed His Own Planter PLANTERS British farmer Jonny Leech spent only about $12 per row to 3D-print the metering system on his home-built planter He says it works as well as most commercially available planters Leech bought a $250 3D printer and a software package called “Solidworks” that allowed him to make 15 prototypes before he came up with a final design that he says provides 99 percent planting accuracy at speeds up to 7 mph The seed meters are chain-driven off the rear press wheels by a stainless steel sprocket that drives a 3D-printed poly sprocket on the meter Leech can change out the sprocket on the meter to alter planting rates He used Great Plains double-disc openers and there are LED sensors in the seed tubes so he can monitor accuracy while planting He’s used the planter both for corn and canola seed
To read the rest of this story, download this issue below or click
here to register with your account number.
