You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Trailer Jack “Roller Stand”
“I built this infinitely adjustable roller stand out of round stock and square tubing. I use it with my bandsaw when handling long material. A trailer jack makes it easy to adjust the height,” says Lee Johnson, Richburg, S.C.
Johnson uses the roller stand in his shop, along with a couple other ones that he built
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Trailer Jack “Roller Stand” FARM SHOP Tools “I built this infinitely adjustable roller stand out of round stock and square tubing I use it with my bandsaw when handling long material A trailer jack makes it easy to adjust the height ” says Lee Johnson Richburg S C Johnson uses the roller stand in his shop along with a couple other ones that he built When spaced 6 ft apart they provide a sliding surface for moving long objects into the saw The roller stand’s base is made from an old 20-in disk coulter Johnson welded a length of 1/2-in round stock vertically onto the coulter and then slid 1-in square tubing over it welding the tubing to the jack At the top of the stand a 12-in long conveyor roller with spring-loaded ends spins freely on a 13-in horizontal steel bracket made from 1/2-in wide 3/16-in thick metal The bracket has a short vertical piece at each end with a hole drilled into it where the spring-loaded ends fit through A welded-on triangle-shaped metal gusset reinforces the bracket Contact: FARM SHOW Followup Lee Johnson 4036 Hayward Lane Richburg S C 29729 ph 803 517-4131; piper235@aol com
To read the rest of this story, download this issue below or click
here to register with your account number.
