You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Wheel Rim Tractor Stands
“I made these garden tractor stands by cutting a wheel rim from a 1/2-ton pickup in half, then welding a pair of wide channel iron brackets onto each half rim. The plates are the same width as the rim and spaced about 1 1/2 ft. apart to hold the wheels in place,” says Michael Heron, Rivercourse, Alberta.
He use
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Wheel Rim Tractor Stands TIRES/WHEELS New Uses “I made these garden tractor stands by cutting a wheel rim from a 1/2-ton pickup in half then welding a pair of wide channel iron brackets onto each half rim The plates are the same width as the rim and spaced about 1 1/2 ft apart to hold the wheels in place ” says Michael Heron Rivercourse Alberta He uses a floor jack or chain hoist to raise the tractor high enough to clear the stands then lowers the tires down between the brackets and onto the rims “It makes working under a garden tractor much safer and doesn’t take up much room ” says Heron “I had been using conventional axle stands but a garden tractor’s frame rails are so close together that it’s hard to find a safe place for them Also with 2 axle stands on each side of the tractor there’s very little room to work My wheel stands don’t take up much space and the extra room is especially handy for servicing deck mower blades ” Contact: FARM SHOW Followup Michael Heron 452078 Range Rd 13 RR 2 Rivercourse Alberta Canada T0B 3X0 ph 306 821-6367; m heron@sasktel net
To read the rest of this story, download this issue below or click
here to register with your account number.
