You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Chainsaw Chain Sharpening Tip: Make Marks On Vise
Sharpening chainsaw chains is faster and more accurate for Glenn Alpert since he added lines on his vise.
I used a Dremel tool to mark the right angle, he explains. I put the bar in the vise and run the file 3 or 4 times on each tooth and then move the chain ahead. I can sharpen a chain in less than 5 minutes
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Chainsaw Chain Sharpening Tip: Make Marks On Vise WOODLOT EQUIPMENT Chain Saws Sharpening chainsaw chains is faster and more accurate for Glenn Alpert since he added lines on his vise I used a Dremel tool to mark the right angle he explains I put the bar in the vise and run the file 3 or 4 times on each tooth and then move the chain ahead I can sharpen a chain in less than 5 minutes The Paola Kan man has used the method often recently while cutting Osage orange trees I have to sharpen the chain about every 2 tanks of gas I cut 10 cords of hedge wood and sharpened the saw every time without taking the chain off he says The vise is mounted on an old burr mill stand and easy to take to the field Contact: FARM SHOW Followup Glenn Alpert 15163 W 323rd St Paola Kan 66071 ph 360 241-3622; ksbrdmkr@cs com
To read the rest of this story, download this issue below or click
here to register with your account number.
