You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Quick-Tach Sleeve With Slides Over Drawbar
My woodsplitter and some of my trailers have ball hitches, but I have other equipment with pin hitches. I got tired of putting a ball on and off so I made a quick-tach sleeve to slide over the drawbar. I welded 2 pieces of 3-in. channel iron together, drilling 2 holes in the sleeve to match the 2 holes in the drawbar
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Quick-Tach Sleeve With Slides Over Drawbar HITCHES My woodsplitter and some of my trailers have ball hitches but I have other equipment with pin hitches I got tired of putting a ball on and off so I made a quick-tach sleeve to slide over the drawbar I welded 2 pieces of 3-in channel iron together drilling 2 holes in the sleeve to match the 2 holes in the drawbar I used a pair of 1/2-in bolts to go through the sleeve and drawbar Hairpins through the bottom ends of the bolts keep them from jumping out I welded nuts to the top of the bolts positioned on their sides and attached 1/8-in pieces of cable to the bolts and hair pins so they wouldn’t get lost Now it takes only seconds to install the sleeve and ball hitch Terry Morgel Avon Minn
To read the rest of this story, download this issue below or click
here to register with your account number.
