You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Air-Powered Riding Mower Sprayer
“I made a pressurized sprayer for my riding mower using 2 air tanks from truck brakes and a 3-gal. sprayer,” says Ron Nahrwold, New Haven, Ind.
“The air tanks are plumbed together and hold 150 psi. I put a ball valve and inlet for the air hose on one side and a ball valve, pressure regulator and hose disconnec
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Air-Powered Riding Mower Sprayer MOWERS “I made a pressurized sprayer for my riding mower using 2 air tanks from truck brakes and a 3-gal sprayer ” says Ron Nahrwold New Haven Ind “The air tanks are plumbed together and hold 150 psi I put a ball valve and inlet for the air hose on one side and a ball valve pressure regulator and hose disconnect on the other side “I glued the pump shut on the sprayer and drilled a hole in the tank to install an air hose coupling connector I run an air hose from the air tanks to the sprayer and adjust air pressure to about 20 psi I also installed a longer hose and a new wand on the sprayer “Spray pressure stays constant and lasts for hours No more annoying hand pumping Works great ” Contact: FARM SHOW Followup Ron Nahrwold 14828 Bremer Road New Haven Ind 46774 ph 260 749-5473; redspokewheel@hotmail com
To read the rest of this story, download this issue below or click
here to register with your account number.
