You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Mill Your Own Lumber
"If a farmer plans to build several buildings and has a stand of straight trees, he can save plenty building himself a sawmill," says Jacob Dykstra of Cotton-wood, Calif., whose home-built, one-man mill will cut about 2,500 ft. per day of up to 30-in. logs.
Jacob says he incorporated several of the best features
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Mill Your Own Lumber WOODLOT EQUIPMENT Saws 5-6-23 "If a farmer plans to build several buildings and has a stand of straight trees, he can save plenty building himself a sawmill," says Jacob Dykstra of Cotton-wood, Calif., whose home-built, one-man mill will cut about 2,500 ft. per day of up to 30-in. logs.
Jacob says he incorporated several of the best features of other mills into his design. It's powered by a Ford industrial 223 cu. in. engine that turns at 2,300 rpm, powering a 40-in. blade that's water-cooled by a stream of water at 1,000 rpm. No piece of wood, he says, can stop his engine and blade combination.
"Tracking must be accurate. I laid the saw table out with a transit and 48-in. caliper. With the variable hydraulic feed, the saw is accurate to within 1/16 of an inch," Jacob told FARM SHOW. The saw handles logs up to 14-ft. long and, except for finished lumber, he says planing is not necessary.
The complete sawmill costs about $2,000 to build and Jacob says it burns about 1 gal. of gasoline to cut 350 to 450 ft., depending on the wood. Jacob has nothing to sell but will answer inquiries accompanied by stamped, return envelopes.
Contact: FARM SHOW Followup, Jacob Dykstra, P.O. Box 29, Cottonwood, Calif. 96022.
To read the rest of this story, download this issue below or click
here to register with your account number.
