You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Update To Boldt Self-Propelled, Side Unloading Feed Mixer
A few years ago you ran an article about the self-propelled, side unloading feed mixer I built by combining parts from a military semi tractor and a pull-type feed mixer (Vol. 35, No. 2). The mixer is made entirely from used equipment, and any parts like chains or sprockets were all purchased online at surplus prices.
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Update To Boldt Self-Propelled Side Unloading Feed Mixer LIVESTOCK Feeding Equipment A few years ago you ran an article about the self-propelled side unloading feed mixer I built by combining parts from a military semi tractor and a pull-type feed mixer Vol 35 No 2 The mixer is made entirely from used equipment and any parts like chains or sprockets were all purchased online at surplus prices The mixer’s Detroit 4-71 diesel engine recently went bad so I replaced it with a military surplus Allis Chalmers engine The mixer was originally chain-driven but I wanted something more reliable so I bought a pto from Beiler Engine & Mfg ph 717 529-6595 and bolted it onto the engine Works great I also re-mounted the mixer’s cross conveyor on rollers that ride on a short metal track A switch in the truck cab activates an electric actuator that drives the rollers I can move the conveyor in or out up to 1 1/2 ft By retracting the conveyor all the way I can go down an aisle and dump feed off to one side without driving over feed that has already been dumped on the other side of the aisle Jay Boldt 7120 Co Rd C Manitowoc Wis 54220 ph 920 323-0987; boldtdairy@lakefield net
To read the rest of this story, download this issue below or click
here to register with your account number.
