You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Solid Outdoor “Workbench” Great For Pounding
“I’ve used this outdoor workbench for many years. I made it from a 3-ft. long piece of 4-ft. dia. steel pipe,” says Douglas Edwards, Englehart, Ontario.
“I first put a couple inches of concrete in the bottom of it and then filled it up to about 10 in. from the top with gravel. Then I filled it up with concret
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Solid Outdoor “Workbench” Great For Pounding FARM SHOP Miscellaneous “I’ve used this outdoor workbench for many years I made it from a 3-ft long piece of 4-ft dia steel pipe ” says Douglas Edwards Englehart Ontario “I first put a couple inches of concrete in the bottom of it and then filled it up to about 10 in from the top with gravel Then I filled it up with concrete so it’s level with the top A piece of 1-in thick steel plate with bolts welded to the underside was pushed into the wet concrete to hold it firm I also inserted a few bars to use for bending and attached a vise to the side of the pipe “This circular workbench is ideal for swinging a heavy hammer when you need to straighten something out I enjoy working outside so I often use my torch and welder on this heavy table ” Contact: FARM SHOW Followup Douglas Edwards 287065 Spruce Grove Rd Englehart Ont Canada P0J1H0
To read the rest of this story, download this issue below or click
here to register with your account number.
