Crank Top-Wind Jacks With Your Impact Wrench

Crank Top-Wind Jacks With Your Impact Wrench FARM SHOP Miscellaneous You can eliminate manual cranking of almost any top-wind jack by replacing the handle with this new accessory that’s designed to accept a 1/2-in impact wrench and socket The ImpactApp was invented by Ralph Deshetsky of North Branch Mich and is now on the market It’s made from cold-rolled steel and is zinc-plated To install just remove the crank handle and the 1/4-in bolt and nut from the jack’s shaft then place the ImpactApp on the shaft and bolt it on using a pair of holes provided “Almost no effort is required ” says Deshetsky “It takes an average of only 20 sec to travel the stroke of the jack It’s compatible with most all top-wind jacks and works great on everything from round balers to disks hay rakes and chisel plows as well as horse snowmobile and camping trailers ” Two ImpactApp models are available depending on the jack’s shank diameter The App1 has a 1/2-in hole lengthwise and the App2 has a 5/8-in hole lengthwise Both have a 1/4-in cross hole A package of 2 ImpactApps sells for $15 including S&H “If you only need one give the other one away and gain a lifetime friend ” says Deshetsky Contact: FARM SHOW Followup Orr Lumber P O Box 338 North Branch Mich 48461 ph 810 688-3171; fax 810 688-2480; lumbershop@netzero net

To read the rest of this story, download this issue below or click here to register with your account number.