You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Bandsaw Modifications
Stan McDonald, Foxboro, Ont.: As a metal working professional who sells DC speed controls (featured in FARM SHOW’s Vol. 26, No. 4), I’ve had readers ask if they can use a wood-cutting bandsaw to cut steel. My answer is that you can’t, unless you modify the saw so you can run it at different speeds. The reason is tha
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Bandsaw Modifications FARM SHOP Miscellaneous Stan McDonald Foxboro Ont : As a metal working professional who sells DC speed controls featured in FARM SHOW’s Vol 26 No 4 I’ve had readers ask if they can use a wood-cutting bandsaw to cut steel My answer is that you can’t unless you modify the saw so you can run it at different speeds The reason is that to cut wood you need to be running much faster at about 3 000 fpm feet per minute while for steel you should be running at just 150 fpm “I converted a 14-in Ridgid bandsaw for a friend by making a box to hold two driveshafts so you can switch from one set of belts and pulleys to another depending on whether you are cutting steel or wood You also need to change the blade to match what you’re cutting “Another way to vary the speed is to install a 3-phase AC motor and install a Variable Frequency Drive that can be run on single phase This gets a little more complicated but I have written an article on how to do it You can email me if you’re interested in more details smcdonal@kos net ”
To read the rest of this story, download this issue below or click
here to register with your account number.
