Turn Your Cordless Drill Into A Mobile Drill Press

Turn Your Cordless Drill Into A Mobile Drill Press FARM SHOP Miscellaneous Rapidrill attaches to almost any standard collared cordless drill and turns it into a mobile drill press It also adds a lot of leverage allowing you to put large holes through thick steel fast



    The Rapidrill can be used on everything from steel plate to C-channel to pipe It aligns your drill at a right angle to the drilling surface One end of the frame attaches to the collar of the drill to hold it steady while a receiver tube at the other end is placed against the material to be drilled The operator holds the drill with one hand and uses his other hand to pull down on a built-in lever that acts on a gear and sprocket system



    According to the company the design provides your drill with more than 1 000 lbs of additional force for powerful leverage at a perfect right angle allowing precise control and making it much easier to drill As you push down on the lever it applies about 10 times as much force to the drill bit as you could without it



    The company claims you can drill a 1-in dia bit through 1/2-in thick steel in less than 30 seconds and a 1/2-in dia bit through 1/4-in thick steel in just 10 to 15 seconds And because you’re drilling at a true right angle with constant increased pressure you save on the life of your drill bits     



    The Rapidrill is available online or at any Fastenal retailer in the U S



    Contact: FARM SHOW Followup Rapidrill LLC 1233 S Old Hwy 91 Kanarraville Utah 84742 ph 855 993-7455; www rapidrill com; support@rapidrill com

To read the rest of this story, download this issue below or click here to register with your account number.