You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Home-Built Stump Grinder Gets The Job Done Safely
FARM SHOW reader Michael Reedy contacted us to say that he was inspired by a homebuilt stump grinder featured in a past issue of FARM SHOW (Vol. 36, Issue 6). The Powell, Tenn., resident had about 20 stumps around his home, and his mother had a large 4-ft. sugar maple tree stump in her yard.
Reedy built the fr
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Home-Built Stump Grinder Gets The Job Done Safely WOODLOT EQUIPMENT Miscellaneous FARM SHOW reader Michael Reedy contacted us to say that he was inspired by a homebuilt stump grinder featured in a past issue of FARM SHOW Vol 36 Issue 6 The Powell Tenn resident had about 20 stumps around his home and his mother had a large 4-ft sugar maple tree stump in her yard Reedy built the frame from scrap steel He already had a 9 hp side shaft motor to power it For the cutter wheel he purchased 12 Rayco stump-grinder teeth from Baileys www baileysonline com and bolted them on a 48-tooth No 60 chain sprocket with 5/8-in grade 8 bolts “I mounted the motor and cutter wheel to a 3/8-in steel plate that slides to adjust belt tension I added a clutch wheel with a golf ball handle to tighten the belts while operating and a kill switch on the handlebars for safety ” Reedy says He also cut a guard out of two layers of a 15-gal plastic barrel to cover the cutter wheel to stop flying wood chips Making a machine safe to run was important to Reedy as the grinder is operated by his best friend Rickey and his son Reedy is in a wheelchair so he doesn’t operate the grinder himself A 2 3/4-in pulley on the motor and 4 1/4-in pulley on the cutter wheel shaft provides about 2 000 rpm’s to the cutter wheel “Rickey who is only 160 pounds says it works well and he can handle it without straining ” Reedy says “Since it’s only 9 hp he has to be careful not to put too much pressure and stall it out ” The stump grinder operates by pushing the grinder wheel down by lifting up the handlebars made out of bent 3/4-in pipe and moving them side to side Despite its relatively small size the grinder can take out a 12-in hardwood stump that is 6 in tall in about 15 minutes With less than $400 invested in it Reedy says the grinder paid for itself just getting the stumps out of his yard Contact: FARM SHOW Followup Michael W Reedy 225 Over Mountain Lane Powell Tenn 37849 ph 865 805-7119; mreedy06@comcast net
To read the rest of this story, download this issue below or click
here to register with your account number.
