You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Cut-Off Template Helps Make Uniform Fence Posts
Along with a couple of other volunteers, I was helping redo a fence around a local graveyard. We needed to set 36 4 by 4 posts to the same height. We also wanted the posts to be angled at the top to shed water. Since no one had a circular saw big enough to cut through the posts with one pass, I decided to make a jig
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Cut-Off Template Helps Make Uniform Fence Posts FENCING Miscellaneous Along with a couple of other volunteers I was helping redo a fence around a local graveyard We needed to set 36 4 by 4 posts to the same height We also wanted the posts to be angled at the top to shed water Since no one had a circular saw big enough to cut through the posts with one pass I decided to make a jig to do the job with a reciprocating saw I started by welding together two rectangular boxes big enough to fit over the posts out of 1-in sq tubing I bolted them together with washers between so there’s just enough room for a saw blade The boxes are long enough to allow the blade to cut through without hitting the bolts that hold them together The narrow slots keep the saw blade from wandering To get the right angle I bolted the template to a couple of short angled 2 by 4’s and a piece of plywood that connects them Then I attach the whole assembly to the post with a C-clamp We snapped a chalk line along the outside of the posts to align the template The idea cost me nothing worked great and the cuts came out very uniform The new fence looks great Contact: FARM SHOW Followup Philip Whitmoyer 236 Ziegler Road Leesport Penn 19533 ph 610 926-1014
To read the rest of this story, download this issue below or click
here to register with your account number.
