You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Quick Fix For Ford Hydraulic Clutch
Lauris Bailey fixed the hydraulic clutch in his 1987 Ford F350 when the local dealer couldn’t. Bad hydraulic clutches in that vintage Ford are so common that Ford puts out a repair kit. However, once repaired, it can’t be repaired again.
“The problem is Ford started building the firewall too thin, and
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Quick Fix For Ford Hydraulic Clutch PICKUPS Accessories Lauris Bailey fixed the hydraulic clutch in his 1987 Ford F350 when the local dealer couldn’t Bad hydraulic clutches in that vintage Ford are so common that Ford puts out a repair kit However once repaired it can’t be repaired again
“The problem is Ford started building the firewall too thin and over time it flexes when you push in the clutch ” explains Bailey “The hydraulic reservoir on the other side of the firewall malfunctions The repair kit is a flat plate that is installed between the reservoir and the firewall ”
The mechanic at the dealership saw that the plate was already in place Over time the firewall had started to flex again
“I could push the clutch most of the way down but I couldn’t change gears ” says Bailey “The tube from the reservoir was not delivering enough fluid to the slave cylinder It didn’t have enough throw to release the clutch plate Sometimes I could shift for awhile and other times I would have to fool with it ”
Bailey figured that if the problem was firewall flex he would give it some backbone He bought a new reservoir and tube and measured from the firewall to the engine side of the radiator support bracket It was just 3 ft
To stiffen the firewall he went to a salvage yard and bought a 3-ft long 3/4-in rod and screwed 2 nuts on either end He then installed the rod between the firewall next to the reservoir and the radiator support
“I screwed the nuts on either end out half a turn at a time until the rod was secure and then locked them in place by screwing out the second set of nuts ” says Bailey “Over time the firewall flexed again and I screwed the nuts out a little more
Bailey says the first fix lasted for months and the second allowed him to cut and haul firewood with the truck throughout the summer
“Hydraulic clutches were the worst idea Ford ever had and I’ve driven them all my life ” says Bailey “This was just the best way to deal with a poor idea of a clutch ”
Contact: FARM SHOW Followup Lauris Bailey 173 Bailey Hill Rd New Sharon Maine 04955 ph 207-778-4005
To read the rest of this story, download this issue below or click
here to register with your account number.
