You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
How To Remove Tires Off The Rims On A 1954 Farmall H Tractor
Wayne Beggs, Lincolnton, Ga.: “I recently bought a 1954 Farmall H tractor that had been sitting inside a shed since 2000. All the tires on it were flat, and one of the 16-in. wheel rims on front was in bad condition after sitting in the dirt all that time. It was very difficult to get the tire off the rim because you
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
How To Remove Tires Off The Rims On A 1954 Farmall H Tractor FARM SHOP Miscellaneous Wayne Beggs Lincolnton Ga : “I recently bought a 1954 Farmall H tractor that had been sitting inside a shed since 2000 All the tires on it were flat and one of the 16-in wheel rims on front was in bad condition after sitting in the dirt all that time It was very difficult to get the tire off the rim because you can’t put the wheel on a regular tire changing machine because there’s no center hub on the wheel I decided to cut the center out of another rim and fit it to the Farmall rim That would let me use a tire changing machine instead of having to do the job by hand which is how it has been done over the past 60 years on Farmalls “I went to a junkyard and found a solid 16-in Deere wheel rim I cut out the center of the wheel and drilled holes to match the mounting tabs on the Farmall rim I also enlarged the hole at center to fit the Farmall hub “This modification makes changing the front tires an easier and safer job ”
To read the rest of this story, download this issue below or click
here to register with your account number.
