You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
How To Make Handy Spring Clamps
Brad Miller, Ridgeville Corners, Ohio: “Here’s a way to make some handy spring clamps. A short length of pvc pipe and 2 dowel rods are the only materials required. Drill 2 holes through the pipe at a 90 degree angle from each other. The holes should be slightly smaller than the diameter of the dowel rods so the rods wi
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
How To Make Handy Spring Clamps FARM SHOP Miscellaneous Brad Miller Ridgeville Corners Ohio: “Here’s a way to make some handy spring clamps A short length of pvc pipe and 2 dowel rods are the only materials required Drill 2 holes through the pipe at a 90 degree angle from each other The holes should be slightly smaller than the diameter of the dowel rods so the rods will fit snuggly into them and serve as handles The thicker the pvc is or the wider the piece that you’re working on is the more squeeze pressure you’ll have “Split lengths of vinyl tubing can be added to keep the pipe’s sharp edges from marring the surface of your project ”
To read the rest of this story, download this issue below or click
here to register with your account number.
