Rare Collection Of Antique Garden Tractors

Rare Collection Of Antique Garden Tractors TRACTORS Antiques We were impressed by the quality of a collection of rare antique garden tractors at the recent Pioneer Power antique tractor show near LeSeuer Minn Ron Gittins of Buffalo Minn showed 8 garden tractors made in the 1940’s and 50’s most of them restored and in great condition He hauls them to about 10 shows each year “I like garden tractors from the 1940’s and 50’s because in those days the manufacturers weren’t afraid to put out something unusual ” says Gittins “I collect only the rarest and most unusual models I can find At shows most people tell me they’ve never seen or even heard of most of the ones in my collection ” The unique tractor collection is well cared for as Gittins keeps them all locked up in a 28-ft enclosed trailer until the show season As a result the tractors look like they just came off the dealer’s show floor Here’s a rundown on each one 1955 Sears Craftsman 3-wheeler Powered by a Craftsman 2 hp 2-stroke Power Products engine this tractor was originally designed to pull a reel mower It weighs only 110 lbs “This tractor doesn’t have a reverse gear but it’s so light that you can push it backward with your feet as you’re sitting down ” says Gittins “The operator uses a clutch lever connected to a belt tensioner to go forward Brakes were optional To stop you put your feet down on the ground just like Fred Flintstone ”     1960 Wheelhorse Suburban 550 The Suburban 550 was powered by a 5 hp Tecumseh engine and equipped with a 32-in mower deck Gittins’s model still has the original tires “The engine is located under the seat and as a result it can get a little warm on your private parts ” says Gittins     1953 Bantam 14 3-wheeler The small Bantam 14 is powered by a 5 hp engine and belt-driven transmission and has a hand-operated clutch “The cast iron steering wheel was unique to the Bantam ” says Gittins     1942 Steel-Wheeled Speedex B Gittins’s Speedex B is powered by a Briggs & Stratton Z 6 hp engine and has a cylinder-shaped gas tank mounted high off to one side The engine belt-drives a Model A transmission and a narrowed-up model T rear end The driver uses a long lever on one side to steer “You pull the lever to turn left and push it to turn right ” says Gittins “To go forward you push the clutch in with your foot which takes some getting used to The tractor has individual pedal brakes and there’s a lever on back to lift attachments ”      1954 Copar Panzer A 3-wheeler The frame on the Panzer A is made from 2 long steel pipes The tractor rides on big 7 by 16 lugged rear wheels and a smaller single front wheel It’s powered by a Briggs & Stratton 6 or 8 hp engine and came with a narrowed-up Chrysler car rear end and a belt-driven 3-speed transmission with 3 different size pulleys “To go faster or slower you just changed the belts ” says Gittins 1955 David Bradley Tri-Trac Unlike most 3-wheelers the David Bradley Tri-Trac rides on 2 wide front wheels and a single rear wheel It was designed to pull a 1-bottom moldboard plow Power is supplied by a Wisconsin AKND 6 hp engine “This tractor wasn’t particularly popular in its day ” says Gittins “The company built 3 000 AKND’s and it took 7 years to sell them all     “The 3 wheels and long wheelbase made it tippy when turning so the company tried to compensate by installing front wheel weights The tractor didn’t come with a differential Instead it has a forward and reverse variable speed transmission that works like a snowmobile clutch Levers at the base of the steering column are used to control the clutch and throttle Other levers are used to lift the plow and to adjust plow depth ” 1958 Lawn Boy Loafer The Loafer was Lawn Boy’s version of a riding mower and came with 2 engines One engine drives a 2-wheeled dolly that pins onto the back side of a 22-in deck and the other powers the deck blades A lever is used to adjust ground speed “The deck doesn’t have a throttle and always runs at 2 000 rpm’s ” says Gittins     “The Loafer is real lightweight which makes it easy to pick up Both the dolly and deck ride on semi pneumatic wheels at a time when most other tractors rode on pneumatic wheels By replacing the deck with a pair of wheels the operator could quickly convert the machine into a 4-wheeled tractor ”     Contact: FARM SHOW Followup Ron Gittins 3205 Darrow Ave S E Buffalo Minn 55313 ph 763 972-2076

To read the rest of this story, download this issue below or click here to register with your account number.