You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Slide In Cab Over Stock Rack
Our slide-in, cab-over stock rack lets you haul horses or cattle in the back of any 3/4-ton pickup. It's built from 1 1/4-in. sq. steel tubing and weighs only 420 lbs. so two people can slide it in or out of the pickup bed. Rails at the front and rear can be bolted down to the bed, or you can bolt a 4 by 8 by 3/4-in. s
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Slide in cab over stock rack MISCELLANEOUS EQUIPMENT Miscellaneous 15-3-35 Our slide-in, cab-over stock rack lets you haul horses or cattle in the back of any 3/4-ton pickup. It's built from 1 1/4-in. sq. steel tubing and weighs only 420 lbs. so two people can slide it in or out of the pickup bed. Rails at the front and rear can be bolted down to the bed, or you can bolt a 4 by 8 by 3/4-in. section of plywood to the bottom of the rack and use the weight of the animals to keep it in place. It has a hinged gate. An 8-ft. rack sells for $521 and a 10-ft. model sells for $554. We also build a swing-out saddle rack that mounts just inside the walk-in door of any horse trailer. The rack swings cornpletely outside the door or folds into the front corner of the trailer where you keep your tack. It bolts to the floor and roof of the trailer and can be adjusted with a set screw. Holds three saddles. Sells for $239. (Keith Young, Young's Welding, 205 Coulee Blvd. West, Electric City, Wa. 99123 ph 509 633-0883).
To read the rest of this story, download this issue below or click
here to register with your account number.
