You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Home-Built Pitman Arm Puller
Dave Bulawsky, Auberry, Calif.: “The flywheel studs came loose on my 1946 Case VA row crop tractor. I solved the problem by cleaning them well and then reinstalling them with Blue Loctite. They’ve never come loose again.
“The front axle broke on that ’46 Case so we put a piece of 2-in. angle iron (1/4 in. thi
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Home-Built Pitman Arm Puller FARM SHOP Miscellaneous Dave Bulawsky Auberry Calif : “The flywheel studs came loose on my 1946 Case VA row crop tractor I solved the problem by cleaning them well and then reinstalling them with Blue Loctite They’ve never come loose again “The front axle broke on that ’46 Case so we put a piece of 2-in angle iron 1/4 in thick along the bottom of it We welded it all together and it worked just fine “I built my own pitman arm puller out of a piece of scrap square tubing I cut a notch out of one end welded a 1/4-in nut on top and inserted a bolt It works perfect I’ve used it on my Dodge Dakota and Ram pickups ”
To read the rest of this story, download this issue below or click
here to register with your account number.
