Frost-Proof Waterer Made From Freezer, Sink

Frost-Proof Waterer Made From Freezer Sink LIVESTOCK Feeding Equipment “I got this idea after seeing a story in FARM SHOW a couple years ago about the Kencove underwater float valve ph 800 418-6631; www kencove com ” says Stephen Brubaker Oconto Wis who used an upright freezer and kitchen sink to make a freeze-proof waterer The water line is buried 6 ft deep and comes up through a hole in the bottom of the freezer which lays flat on the ground A kitchen sink mounts in the door of the freezer which opens to the top When the freezer fills up with water it enters the sink through the drain The Kencove float valve is designed to be installed under water at the bottom of a waterer Brubaker buried two 30-gal drums under the freezer one mounted on top of the other with the ends cut out of them The water line which is also wrapped with insulation runs up through the empty drums “It saved us the cost of an expensive frost-proof waterer and it has worked great for the past two winters Because the cattle drink out of the sink it tends to stay ice-free because it’s a small area If it freezes up you just have to break up the ice in the small area ” says Brubaker Contact: FARM SHOW Followup Stephen Brubaker Oconto Wis ph 920 604-0208; steveandemmy81@gmail com

To read the rest of this story, download this issue below or click here to register with your account number.