You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
How To Install Remote Hydraulic Couplers On Deere Tractors
“Installing the remote hydraulic couplers on my Deere tractors can be a difficult job. I’ve got to carefully hold the coupler with one hand so the O-rings don’t fall out, and put bolts in with my other hand. The remote couplers are big and heavy, and it’s an awkward place to get at. To solve the problem, I found a coup
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
How To Install Remote Hydraulic Couplers On Deere Tractors TRACTORS Hydraulics “Installing the remote hydraulic couplers on my Deere tractors can be a difficult job I’ve got to carefully hold the coupler with one hand so the O-rings don’t fall out and put bolts in with my other hand The remote couplers are big and heavy and it’s an awkward place to get at To solve the problem I found a couple of bolts that were about 1 in longer than the original ones and cut the heads off to make a stud bolt I also made a little point on them I used both hands to set the coupler on the 2 stud bolts which are loosely screwed into place Then I put the other 2 bolts in the bottom took the 2 stud bolts out and put the original bolts back in “Whenever I’m installing the front-end loader on my tractor the bolts that hold the loader always seem to turn as I’m trying to tighten them To solve the problem I tach weld one end of a 1/4-in thick 1 by 3-in metal bar to the bolt head As I turn the bolt the bar runs into the loader’s frame which stops it from turning ”
To read the rest of this story, download this issue below or click
here to register with your account number.
